CBM CBM1000 Instructions d'exploitation télécharger pdf (Page 99)

— 81 —

ESC T n

[Function] Selecting the character printing direction in PAGE MODE

[Code] <1B>H<54>H<n>

[Range] 0

n 3

n 51

[Outline] Selects the direction and start point of character printing in

PAGE MODE.

n Printing direction Start point

0, 48 Left to right Top left (“A” in the figure)

1, 49 Bottom to top Bottom left (“B” in the figure)

2, 50 Right to left Bottom right (“C” in the figure)

3, 51 Top to bottom Top right (“D” in the figure)

[Caution] • When STANDARD MODE is selected, this command only

executes the internal flagging of the printer without affecting

the printing in STANDARD MODE.

• The character mapping position will be the start point of the

print area specified by ESC W.

• The basic calculation pitch (x or y) used by the following

commands varies with the start point.

(1) If the start point is the top left or bottom right (The

characters are mapped in the direction perpendicular to

the paper feed),

• Commands using x: ESC SP, ESC S, ESC \

• Commands using y: ESC 3, ESC J, GS $, GS \

(2) If the start point is the top right or bottom left (The

characters are mapped in the paper feed direction),

• Commands using x: ESC 3, ESC J, GS $, GS \

• Commands using y: ESC SP, ESC S, ESC \

[Default] n = 0

[See Also] “PAGE MODE” in APPENDIX 1

ESC $, ESC L, ESC W, ESC \, GS $, GS P, GS \

Print Area

Paper Feed Direction

Reference

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 229 230

Pas de commentaire

CBM CBM1000 Instructions d'exploitation Page 99