CBM CBM1000 Instructions d'exploitation télécharger pdf (Page 95)

— 77 —

ESC L

[Function] Selecting PAGE MODE

[Code] <1B>H<4C>H

[Outline] Switches from STANDARD MODE to PAGE MODE.

[Caution] • This command is only effective if it entered at the beginning

of a line.

• This command is not effective if it is entered when in PAGE

MODE.

• STANDARD MODE is restored when printing specified by FF

is finished or when ESC S is issued.

• The character mapping start position will be the point specified

by ESC T in the print area specified by ESC W.

• The commands listed below, which have separate settings for

PAGE MODE and STANDARD MODE, are changed to the

settings for PAGE MODE use.

(1) Spacing setting: ESC SP

(2) Line feed width setting: ESC 2, ESC 3

• The following commands are valid only in PAGE MODE.

(1) ESC V Specifying/canceling 90°-right-turned characters.

(2) ESC a Aligning the characters.

(3) ESC { Specifying/canceling the inverted characters.

(4) GS L Setting the left margin.

(5) G3S W Setting the print area width.

• ESC @ restores STANDARD MODE.

[See Also] “PAGE MODE” in APPENDIX 1

FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 229 230

Pas de commentaire

CBM CBM1000 Instructions d'exploitation Page 95