CBM CBM1000 Instructions d'exploitation télécharger pdf (Page 120)

— 102 —

GS B n

[Function] Specifying/Canceling the black/white inverted printing

[Code] <1D>H<42>H<n>

[Range] 0

n 255

[Outline] This command specifies or cancels the black/white inverted

printing.

• “n” is valid only for the lowest bit (n0).

• Control by the lowest bit (n0) is shown as follows:

n0 Function

0 The black/white inverted printing is canceled.

1 The black/white inverted printing is specified.

[Caution] • Number “n” is only valid in the lowest bit.

• The black/white inversion works on internal and downloaded

characters.

• The black/white inversion works also on the right spacing of

characters defined by ESC SP.

• This command does not affect the bit image, downloaded bit

image, bar code, HRI characters, or the skip area specified by

HT, ESC $, or ESC \.

• This command does not affect the space between lines.

• Black/white inversion specification takes precedence over

underline specification. Underline printing specified is,

therefore, nullified if black/white inversion is specified; the

underline setting, however, remains unchanged.

[Default] n = 0

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 229 230

Pas de commentaire

CBM CBM1000 Instructions d'exploitation Page 120