CBM CBM1000 Instructions d'exploitation télécharger pdf (Page 159)

— 141 —

GS FF

[Function] Printing and discharging the label.

[Code] <1DH><0C>H

[Outline] This command prints the data in the printer buffer and cuts

discharged the label

[Caution] Valid only if "Label" is chosen for paper type.

Operation depends on the selection mechanism:

No auto cutter:

• The label is advanced to the manual cutter.

• The LED flashes, indicating that the printer is ready for manual

cutting and subsequent FEED switch operations.

• When the FEED switch is pressed, the next label is advanced

to the print position.

With auto cutter:

• The printed label is advanced to the auto cutter position, where

it is completely cut off.

• The next label is advanced to the print position.

[See Also] FF, GS <

With neither exfoliation mechanism nor auto cutter:

Without exfoliation mechanism but with auto cutter:

With both exfoliation mechanism and auto cutter:

• The printed label is advanced to the exfoliation mechanism sensor.

• The label is peeled off the base and removed.

• The next label is advanced to the print position.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 229 230

Pas de commentaire

CBM CBM1000 Instructions d'exploitation Page 159